Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Belmont
Chimney liner and rebuild work in Belmont, VA typically runs $1,800-$4,500 for stainless steel relining and $3,500-$8,000 for partial rebuilds, with most inspections completed same-week and jobs finished in a single visit. If your chimney is venting gas, oil, or wood through an unlined or cracked clay-tile flue, it’s not meeting current NFPA 211 safety standards. Call (571) 701-8135 to book a Level 2 camera inspection - estimates are free, and our dispatch team in Washington, DC coordinates crews serving Belmont directly.
We’ve been working in Loudoun County for over 42 years, and Belmont presents a challenge you won’t find in more uniform suburbs: the same afternoon can take us from a pre-Civil War stone farmhouse off a rural estate road to a zero-clearance factory-built fireplace in a 1990s subdivision near the Dulles corridor. Two miles apart, two completely different chimneys, two different repair protocols. That split housing stock is why generic advice fails here, and why our Chimney Liner & Rebuild team documents every recommendation with photos you can see before any work is approved.
Why Hearthstone Chimney Co. Is Belmont’s Preferred Chimney Liner & Rebuild Company
Belmont homeowners tend to stay in their houses for decades. They’ve also seen enough contractors to know the difference between a salesman and a sweep who’ll still be answering the phone when something needs adjusting. We’ve built our reputation in Loudoun County on being the latter.
Our technicians are background-checked, uniformed, and trained to complete most liner and rebuild jobs in a single visit. No-hassle upfront pricing means the number on your estimate matches the number on your invoice. Every call is answered by a live person, 24 hours a day, 7 days a week - not a callback queue, not an app.
The 90-Day Done Right Promise backs every job in writing. If it’s not right, we make it right. No paperwork to dig up, no arguing. That’s the Keystone Standard: Krafted right, Every time, Your home first, Standing behind it.
We know Belmont’s roads, its rural estate properties, its subdivision cul-de-sacs, and the specific failure patterns that Loudoun County’s freeze-thaw cycles inflict on chimneys here. When you call (571) 701-8135, you’re talking to someone who can dispatch a crew that understands the difference between a Rumford firebox and a factory-built insert - and why that difference changes everything about how we inspect and repair your chimney.
Our Chimney Liner & Rebuild Services in Belmont
Stainless Steel Liner Installation
Most relining jobs we do in Belmont use a DuraFlex stainless steel insert - flexible enough to navigate offset flues in older masonry, durable enough to handle wood, gas, or oil venting for decades. A typical stainless steel liner installation in Belmont runs $1,800-$3,200 depending on flue height, diameter, and whether the existing clay tiles need extraction first.
For the older rural estates near Belmont with wide-throated Rumford fireplaces, stainless steel is often the only safe way to bring an unlined or deteriorating flue up to code. The oversized flue that makes a Rumford draw poorly also makes it impossible to properly vent modern appliances without a correctly sized liner. We measure, we camera, we show you the footage. Then we install.

Flexible Liner Systems
Not every Belmont chimney runs straight. The stone and brick stacks on pre-Civil War farmhouses often shift slightly over centuries, creating offsets that rigid liner sections can’t navigate. Flexible DuraFlex liners solve this without dismantling the chimney structure. In Belmont’s historic housing stock, flexible systems are the difference between a targeted repair and an unnecessary full rebuild.
Pricing for flexible liner installation in Belmont typically falls between $2,200-$3,800, with the premium reflecting the additional labor to navigate complex flue geometry and ensure proper connector fittings at the appliance.

Liner Replacement & Liner Repair
Some Belmont chimneys have liners that are damaged but not destroyed - cracked clay tiles in isolated sections, spalled mortar joints that can be selectively repointed, or stainless inserts that have separated at a connection point. Our Level 2 camera inspection determines whether targeted liner repair will suffice or full replacement is the safer path.
Liner repair in Belmont generally runs $800-$1,800. Full replacement when repair isn’t viable: $2,000-$4,500. We don’t guess. We camera the full flue, mark the damage on the footage, and explain what you’re seeing before any recommendation is made.

Partial Chimney Rebuild
When freeze-thaw damage, moisture intrusion, or years of deferred maintenance have compromised the chimney structure itself, partial rebuild becomes necessary. In Belmont, we see this most often on the older rural estate properties where spalled brick and failed mortar joints have progressed beyond what repointing can salvage.
A partial rebuild in Belmont - typically from the roofline up, including crown and flashing replacement - runs $3,500-$6,500. Full rebuilds are rare but necessary when the stack has shifted or the firebox itself is compromised; those range $6,000-$12,000 depending on height and materials. We use professional-grade Olympia Chimney components and Copperfield masonry materials, matched to your existing brick where possible.
Here’s the critical point for Belmont homeowners: we have rebuilt chimneys that needed it, and we have talked homeowners out of rebuilds they didn’t. The camera footage decides. Not our sales quota.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Belmont
We don’t use builder-grade substitutes. For liner installations in Belmont, we specify DuraFlex flexible stainless systems, HeatShield cerfractory resurfacing for select flue restoration, and Olympia Chimney components where rigid or specialty fittings are required. For rebuilds and repairs, Copperfield masonry supplies and Famco venting products are our standard. These are the brands specified by chimney professionals who plan to stand behind their work for decades - which is exactly what we intend to do in Belmont. Stocking these parts locally means faster turnaround when your heating season can’t wait.
Common Chimney Liner & Rebuild Problems We See in Belmont Homes
- Clay-tile flue liners cracked by Loudoun County freeze-thaw cycles. Belmont’s pre-Civil War farmhouses often have original clay-tile liners that have survived centuries but finally succumb to the region’s repeated winter temperature swings across the freezing point. Water enters micro-cracks, expands, and fractures the tile along mortar joints - letting flue gases and moisture attack the surrounding brick from inside where you can’t see it without a camera.
- Third-degree glazed creosote in wide-throated Rumford fireboxes. The oversized, unlined flues common to older rural Belmont estates inhibit proper draft. Smoke lingers, cools, and deposits tar-like glazed creosote that standard brushes cannot remove. This is a chimney fire hazard, and it’s a failure mode our technicians rarely encounter in the newer subdivision stock toward Dulles.
- Undersized or incorrectly connected flue liners in 1990s-2000s subdivisions. Belmont’s newer housing stock presents the opposite problem: factory-built zero-clearance fireplaces fitted with flue liners that don’t match the appliance’s venting requirements. The chimney looks fine from the outside. Inside, it’s producing carbon monoxide spillage or condensing flue gases that destroy the liner from within.
- Moisture intrusion from uncapped flues and failed crowns. Loudoun County’s humid summers promote moss growth and water entry into chimneys without proper caps or with cracked crowns. By fall, that moisture combines with creosote to form acidic compounds that accelerate liner deterioration - a seasonal cycle we see every year as heating season begins in Belmont.
Pricing for Chimney Liner & Rebuild in Belmont, VA
Honest numbers for Belmont’s market:
| Service | Typical Range in Belmont |
|---|---|
| Level 2 camera inspection with photo report | $199-$289 |
| Stainless steel liner installation (standard flue) | $1,800-$3,200 |
| Flexible liner installation (offset/complex flue) | $2,200-$3,800 |
| Liner repair (targeted, camera-confirmed) | $800-$1,800 |
| Partial rebuild (roofline up with crown) | $3,500-$6,500 |
| Full chimney rebuild | $6,000-$12,000 |
What moves the needle: flue height, accessibility, whether clay tiles must be extracted, and whether the crown or flashing needs simultaneous repair. We price every job upfront after inspection - not before. The $89 Seasonal Tune-Up can identify whether you need liner work before committing to a full Level 2. Seniors and veterans receive a permanent 5% discount. Call (571) 701-8135 for your exact quote; estimates are free.
We Also Serve Cities Near Belmont
Our crews work throughout Loudoun and Fairfax Counties, with regular calls in Belmont, Ashburn, Sterling, Cascades, and Herndon. The same live-answer dispatch, same camera documentation, same 90-Day Done Right Promise applies whether your chimney is off a rural estate road or in a planned community near Dulles.
Serving Belmont, VA - Our Local Coverage Area
We’re based in the Belmont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Belmont
No, you should not continue burning in an unlined flue. An unlined stone chimney in Belmont’s older rural housing stock allows flue gases, creosote, and moisture to penetrate the mortar joints and degrade the structure from inside - a hazard that worsens with every freeze-thaw cycle Loudoun County delivers. We camera the flue first, show you the footage, and size a DuraFlex stainless liner to the Rumford’s specific dimensions so it draws properly and meets NFPA 211. Call (571) 701-8135 to schedule; estimates are free.
Your neighbor’s factory-built fireplace was manufactured with a listed metal flue system already integrated; your older masonry chimney was built before flue liners were required and has been venting directly into brick and mortar for a century or more. Belmont’s split housing stock - historic rural masonry versus 1990s-2000s zero-clearance construction - is exactly why one house needs relining and the other doesn’t. The only way to know which category you’re in is a camera inspection, not a guess based on neighborhood. Call (571) 701-8135 and we’ll show you exactly what your flue contains.
Because we show you the camera footage on our tablet before any work is approved, explain what you’re seeing in plain English, and mark the exact locations of damage. One of our technicians pulled a camera down an original stone chimney off a rural estate property near Belmont and found third-degree glazed creosote clinging to a wide, unlined flue behind a Rumford firebox, with spalled mortar joints that had been weeping moisture for years. We relined the stack with a DuraFlex stainless insert, repaired the crown and flashing, and when the homeowner’s husband asked why we didn’t just sell them a full rebuild, we showed them the same footage - the chimney got a liner and rebuild only where the mortar actually failed, nothing more. That’s how we work. In writing, no arguing.
Yes, often - but the tiles may need partial or full extraction first, and the surrounding mortar must be sound enough to support the new liner and proper insulation pack. Cracked clay tiles alone don’t automatically mandate a full rebuild. We camera the flue, test the mortar integrity, and show you whether a stainless insert can be safely installed or whether structural repair is necessary first. A typical stainless liner with tile extraction in Belmont runs $2,200-$3,800. Call (571) 701-8135 for an exact assessment; estimates are free.
A Level 2 inspection includes a full visual scan of accessible interior and exterior chimney surfaces plus video documentation of the flue interior using a high-resolution camera on a flexible rod - the standard annual cleaning does not include this camera pass. For Belmont’s older homes with unlined or clay-tile flues, or any chimney where you’re considering liner installation, appliance changeout, or property sale, NFPA 211 requires Level 2. You receive dated photos, a plain-English verdict, and a written report. The inspection takes 60-90 minutes and costs $199-$289. Call (571) 701-8135 to book; we’ll be there when we say.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Belmont and Loudoun County since 1984.





Before
After
Before
After
Before
After